Horizontal ram extrusion machine working for the PTFE rod size from φ170mm, φ180mm, φ190mm, φ200mm. It’s can working both for virgin or recycle PTFE powder.One day according to 24 hours, for OD φ200mm PTFE rod, one day output around: 1.5meter, around 90-120KGS.

maker for PTFE rod automatic hydraulic ram extrusion machine

Self feeding powder to the mould, and with water channel for make sure the heating not go to the powder. All control by touch screen and use temperature controller, make sure the temperature has less tolerance.

Horizontal PTFE rod ram extrusion machine with self feeding system, PLC and touch screen for control feeding powder time, holding time and temperature. Setting alarm temperature, if reach the higher temperature will be alarm.

Model number: HX-200W

Suit for Rod size:170mm,180mm,

190mm,200mm

Extruder Rod No.:1pcs

Capacity:55-80KGS

Pressure:200T

Raw material: Pre-sintered PTFE, Filled PTFE, UHMW-PE

Raw material: virgin or recycle

Advantage of  Automatic PTFE Ram Extrusion Machine

1. With full cover, make sure no pollution of the raw material, make the PTFE rod is clean

2. Special desgin for feeding plate, each time stop in the same place make sure the powder feeding weight is the same

3. One person can take in charge for 10-15 set machine in one shift

4. Easy Install and remove the mould

5. All control in touch scree, easy for opearation

6. 24 Hours working, make more production capacity

7. Mould use 316L stainless steel material, make sure, the surfure always is smooth

8.Use PLC and touch screen to control the system

9. Easy mantance

10. Provide 24 hours after-serive

11.Can suit for both recyle and virgin presintered powder

HX-200W PTFE rod ram extrusion machine